Facebook Pixel

What to do when the robot miss to clean a place?

3020 views  March 19, 2020

1.Update the software to the newest version.

2.Reboot the robot vacuum ( not under charging status /removing it from the dock ), the power switch is on the right side of the robot. 

3.After power off, please wait for 2-3 mins, then power it on.

If the above measures do not solve your problem, you can use the following solutions

Please try to change a place for the dock and place the dock in the centre of the whole house (not just the center of the room) , not behind the door, no barriers or mirrors 1.5M around so that its signal can cover the whole house and when it starts off, it will plan the cleaning. 

Did you find it helpful?