How Does Tesvor S4/S6/S6 Turbo Paring & Connect Tesvor APP? - Tesvor Blog

This article will guide you to pair new device and connect to the Tesvor APP. Before read, please make sure you bought the robot vacuum in one of these ---- Tesvor S4/S6/S6 Turbo, then get your robot and mobile app ready, let's get start!

Step 1：

Firstly, you will find a round button on the front of your robot, which is the switch on/off button. Please push it to turn on your device (Tesvor S4/S6/S6 Turbo) and confirm that indicator is blinking fast.

Attention: Please complete the pairing process within 3 minutes after the device reset.

Step 2:

Make sure you connect your house Wi-Fi and choose the 2.4GHz one. Then switch to AP mode by tap the upper right icon. After completing the two steps above, please check the prompts at the bottom of the interface and then tap the "Next" button.

Step 3：

Next to the most crucial step, continue to click the "Go to connect" button below. Then the APP will take you to the WIFI setting interface, where you select the hotspot that starts with "SmartLife" After it is connected, please manually returns to the APP's previous interface.

Step 4：

The final step, tap the confirm and connection button, and waiting for a few seconds until the device connected.

You did this. Good Job!